pookdizzlehtk
02-18-2009, 10:42 PM
I haven't seen this on DI yet. NASIOC is having a group buy on GrimmSpeed's new 3 port MBC. Join in the pool is already down to its lowest teir. the price is now 84.99 and about $5 shipping.
I've been using GrimmSpeed's 3-Port Boost Solenoid for some time now and have found their solenoid provides rapid boost response while maintaining the ability to make acute adjustments via turbo dynamics. While many other boost control solenoids react to adjustments too fast which can make them difficult to control with as much finesse as the stock bleed system. This solenoid can make micro-adjustments at the edge of target boost not only providing better spool, but overall more control. Additionally, the solenoid is plug n' play so you do not have to splice into the wiring harness for it's installation.
GrimmSpeed introduces the most complete and easy to use 3-Port Electronic Boost Solenoid available on the market. Their aftermarket boost controller allows you to raise the OEM boost levels in a quick and efficient manner. If you try to raise the boost on the weak OEM boost solenoid it will start to become unpredictable and unable to maintain proper and safe boost levels. Using GrimmSpeed's solenoid you are able to spool your turbo quicker and maintain a rock solid boost level. They have made the solenoid to withstand 120psi, way more than any Subaru will see
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_2.jpg
Revolutionizing the Subaru boost solenoid market, GrimmSpeed has created model specific install brackets that allow you to directly fit our Boost Solenoid into your Subaru for a factory fit. No more Zip-tying! They give you the factory fitment you have been waiting for.
Staying with the OEM fitment theme, GrimmSpeed's Boost Solenoid uses a Subaru style wiring harness so you can simply unplug your OEM solenoid and plug ours in. No more cutting the oem wiring and crimping wires together!
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_5.jpg
Also new to the Subaru boost solenoid market, they have used ultra low-profile hose fittings to keep the unit as small and clean as possible. The hose fittings are nickel plated brass so you don't have to worry about them snapping off like the plastic hose fittings!
Features:
Direct plug and play into oem wiring.
MAC Valve has completely custom made the valve for us(only MAC valve on the market to be custom made for automotive tuning use).
Users can use AN fittings with the solenoid.
Mounting bracket so its a direct bolt on into factory location.
Low-profile brass hose fittings(small in size so its compact, no chance of breaking fittings like the plastic ones our competitors use).
Specifically designed by GrimmSpeed to work safely with the factory Subaru ECU (requires tuning) and to reliably handle the vibrations and temperatures of your engine bay!
The only direct “bolt in” design for all Subaru models. Direct bolt in mounting bracket and hardware included! (specify which model before ordering)
Includes plug and play harness, no wire splicing required and easy to return to stock.
Allows you to raise the factory boost levels with adding more response and more control.
Allows you to get full boost sooner.
Faster response and greater flow than any other valve out there. (by more than 10%!)
Nickel plated brass fittings. (unlike the competitors failure prone plastic fittings)
This BCS will handle all your boost control needs no matter what your power goals are.
Easy for your shop or tuner to tune
GROUP BUY DETAILS
Closes on: Wednesday, March 4th (2 weeks long)
Participant limit: No-limit
Pricing structure: Tiered
Normal MSRP: 109.99
1-10 participants: 104.99
11-20 participants: 99.99
21+ participants: 84.99
Shipping will be $5 to anywhere in the 48 states. International shipping will be extra.
PARTICIPANT LIST:
1. bisonjr - 07 WRX
2. Daishi00 - 05 WRX
3. omegax - 08 STi
4. CKxx - 02 WRX
5. Big-Sexy907 - 04 STi
6. Baay - 07 WRX
7. DarkKnightBaku - 04 STi
8. bryant53 - 05 WRX
9. xazzu - 06 WRX
10 scubywagon - 04 WRX
11. herewego311 - 2000 RS w/ 04 STi swap
12. PSI_XTC - 02 WRX
13. macio04 - 04 WRX
14. blakaraknyd - 05 WRX
15. sch3838 - 07 WRX
16. dbedigrew - 05 LGT
17. BreaknLoose - 04 WRX
18. vodka9er - 07 STi
19. karnlax - 07 WRX
20. Zor - 08 STi
21.
So if/when we get to the best pricing tier, you are looking at $89.99 for by far the most complete and compact boost solenoid on the market!
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_4.jpg
3 bracket variations fit all Turbo Subaru models!
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_6.jpg
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_11_with_notes.jpg
Solenoid and Bracket attached to 05+ LGT and 08+ WRX OEM bracket
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_7.jpg
Solenoid and Bracket attached to 08+ STi OEM Bracket
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_8.jpg
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_2_with_notes.jpg
I've been using GrimmSpeed's 3-Port Boost Solenoid for some time now and have found their solenoid provides rapid boost response while maintaining the ability to make acute adjustments via turbo dynamics. While many other boost control solenoids react to adjustments too fast which can make them difficult to control with as much finesse as the stock bleed system. This solenoid can make micro-adjustments at the edge of target boost not only providing better spool, but overall more control. Additionally, the solenoid is plug n' play so you do not have to splice into the wiring harness for it's installation.
GrimmSpeed introduces the most complete and easy to use 3-Port Electronic Boost Solenoid available on the market. Their aftermarket boost controller allows you to raise the OEM boost levels in a quick and efficient manner. If you try to raise the boost on the weak OEM boost solenoid it will start to become unpredictable and unable to maintain proper and safe boost levels. Using GrimmSpeed's solenoid you are able to spool your turbo quicker and maintain a rock solid boost level. They have made the solenoid to withstand 120psi, way more than any Subaru will see
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_2.jpg
Revolutionizing the Subaru boost solenoid market, GrimmSpeed has created model specific install brackets that allow you to directly fit our Boost Solenoid into your Subaru for a factory fit. No more Zip-tying! They give you the factory fitment you have been waiting for.
Staying with the OEM fitment theme, GrimmSpeed's Boost Solenoid uses a Subaru style wiring harness so you can simply unplug your OEM solenoid and plug ours in. No more cutting the oem wiring and crimping wires together!
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_5.jpg
Also new to the Subaru boost solenoid market, they have used ultra low-profile hose fittings to keep the unit as small and clean as possible. The hose fittings are nickel plated brass so you don't have to worry about them snapping off like the plastic hose fittings!
Features:
Direct plug and play into oem wiring.
MAC Valve has completely custom made the valve for us(only MAC valve on the market to be custom made for automotive tuning use).
Users can use AN fittings with the solenoid.
Mounting bracket so its a direct bolt on into factory location.
Low-profile brass hose fittings(small in size so its compact, no chance of breaking fittings like the plastic ones our competitors use).
Specifically designed by GrimmSpeed to work safely with the factory Subaru ECU (requires tuning) and to reliably handle the vibrations and temperatures of your engine bay!
The only direct “bolt in” design for all Subaru models. Direct bolt in mounting bracket and hardware included! (specify which model before ordering)
Includes plug and play harness, no wire splicing required and easy to return to stock.
Allows you to raise the factory boost levels with adding more response and more control.
Allows you to get full boost sooner.
Faster response and greater flow than any other valve out there. (by more than 10%!)
Nickel plated brass fittings. (unlike the competitors failure prone plastic fittings)
This BCS will handle all your boost control needs no matter what your power goals are.
Easy for your shop or tuner to tune
GROUP BUY DETAILS
Closes on: Wednesday, March 4th (2 weeks long)
Participant limit: No-limit
Pricing structure: Tiered
Normal MSRP: 109.99
1-10 participants: 104.99
11-20 participants: 99.99
21+ participants: 84.99
Shipping will be $5 to anywhere in the 48 states. International shipping will be extra.
PARTICIPANT LIST:
1. bisonjr - 07 WRX
2. Daishi00 - 05 WRX
3. omegax - 08 STi
4. CKxx - 02 WRX
5. Big-Sexy907 - 04 STi
6. Baay - 07 WRX
7. DarkKnightBaku - 04 STi
8. bryant53 - 05 WRX
9. xazzu - 06 WRX
10 scubywagon - 04 WRX
11. herewego311 - 2000 RS w/ 04 STi swap
12. PSI_XTC - 02 WRX
13. macio04 - 04 WRX
14. blakaraknyd - 05 WRX
15. sch3838 - 07 WRX
16. dbedigrew - 05 LGT
17. BreaknLoose - 04 WRX
18. vodka9er - 07 STi
19. karnlax - 07 WRX
20. Zor - 08 STi
21.
So if/when we get to the best pricing tier, you are looking at $89.99 for by far the most complete and compact boost solenoid on the market!
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_4.jpg
3 bracket variations fit all Turbo Subaru models!
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_6.jpg
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_11_with_notes.jpg
Solenoid and Bracket attached to 05+ LGT and 08+ WRX OEM bracket
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_7.jpg
Solenoid and Bracket attached to 08+ STi OEM Bracket
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_8.jpg
http://www.grimmspeed.com/images/product_images/boost_solenoid_600_2_with_notes.jpg