Just another Easy Light Mount

[dome24]

I have a set of Piaa Pro 80xt's that were off my Tacoma just sitting in storage so i decided to put them to use for Night-time Hijinks. The mount shakes a little bit but it's not designed for permanent use, just to tide me over till i can get a RI guard.

I used just an angle piece of angle steel behind my front plate and mounted the lights to it using the Piaa mounts.
http://i126.photobucket.com/albums/p113/dome24/utf-8BSU1HMDAyMDIuanBn.jpg
Wired a relay to trigger off of the Hi-Beams without a switch. HiBeams on=Piaa on.
Because of the switched ground I actually used the Yellow-Red wire which is the low beam ground then goes hot when you hit the Hi-beams.
http://i126.photobucket.com/albums/p113/dome24/utf-8BSU1HMDAyMDQuanBn.jpg

I'm off for night pix:eek:

[WRXCMM]

you might need additional support because of the weight and the position of the lights.

but check it out for yourself and let us know how they do, do have some pics for us to look at though:tongue: