PDA

View Full Version : GrimmSpeed PnP and Coating Services


GrimmSpeed
07-05-2007, 05:22 PM
Info below. More info can be found at www.grimmspeed.com




Exhaust Manifold
Welcome to our hottest product! Our Subaru boxer engines kill our spool up time, most noteably because of the very long exhaust manifold. To directly combat this loss of spool up we will port and polish all 9 inlets/outlets of your 3 piece exhaust manifold. We enlarge each port to match up with the stock subaru gaskets, porting ~6-7mm of material at the entrance/outlet of each port.

Exhaust Manifold $189.99 (+ 100 refundable core charge)
Exhaust Manifold w/ Ceramic Coating $239.99 (+ 100 refundable core charge)
http://www.grimmspeed.com/images/product_images/exhaust_mani_product_image_2.gif
http://www.grimmspeed.com/images/product_images/exhaust_mani_product_image_3.gif

Turbo
Porting and polshing your turbo is the single most important service we offer for decreasing your spool up times and shifting your entire powerband to the left. We port and polish both hotside inlet/outlet AND coldside inlet/outlet for maximum flow. Currently we have stopped our ceramic coatings for the turbo...if you can't live without the coating please contact us and we can work something out.

**[B]PLEASE CONTACT FOR TURBO PRICING
http://www.grimmspeed.com/images/product_images/turbo_product_image_2.gif
http://www.grimmspeed.com/images/product_images/turbo_product_image_4.gif


TGV Delete
Dont feel like spending 500 for a new set up butterfly-less tgvs? For less than 1/2 the price you can get the same exact benefits from our TGV Deletes. In this process we take a stock TGV and completely gut it, which includes taking out the metal plate, butterflies, and bar. These will allow for maximum flow through the TGV. Stop the engine's heat from entering the TGV's with our ceramic coating. It is very important that heat stays out of the TGV's because this is the last transfer before the intake air enters the engine. Cooler intake air equals more hp.

TGV Delete $179.99 (+ 100 core charge)
TGV Delete w/ Ceramic Coating $204.99 (+ 100 core charge)
http://www.grimmspeed.com/images/product_images/tgv_product_image_1.gif
http://www.grimmspeed.com/images/product_images/tgv_product_image_2.gif
http://www.grimmspeed.com/images/product_images/tgv_product_image_4.gif

Downpipe
Match up that turbo to downpipe connection with our PnP service. We will gasket match your downpipe inlet to the turbo>downpipe gasket. If you have a divorced wastegate downpipe we will knife edge(show in picture) the split for smoother air flow. Keep the super-heated exhaust in your downpipe and away from your tranny by adding our ceramic coating. We also advise heat wrapping your downpipe as a second defense against the heat.

Downpipe PnP AND Coating Package $169.99 (no core exchange, customer must send downpipe in for service)

PnP Service Only $79.99 (no core exchange, customer must send downpipe in for service

Ceramic Coating Service Only $89.99 (no core exchange, customer must send downpipe in for service)
http://www.grimmspeed.com/images/product_images/downpipe_product_image_1.gif
http://www.grimmspeed.com/images/product_images/downpipe_product_image_2.gif

Intake Manifold
We bore out the ends of each of the 4 runners to better match up with the inlet of the TGV. From the factory there is a large step going into the TGV, we get rid of that step for a smoother transition. Feel like adding the bling factor with function?...add our option ceramic coating as shown in picture.

PnP Intake Manifold - WRX $79.99 (+ 100 core charge)

PnP Intake Manifold - STi/FXT $79.99 (+ 150 core charge)
Ceramic Coating Add-On $69.99

http://www.grimmspeed.com/images/product_images/intake_mani_product_image_1.gif

GrimmSpeed
07-05-2007, 05:26 PM
http://www.grimmspeed.com/images/IMG_2913small.jpg
http://www.grimmspeed.com/images/IMG_2917small.jpg
http://www.grimmspeed.com/images/IMG_2918small.jpg
http://www.grimmspeed.com/images/IMG_2919small.jpg


those are coated on the inside too :D

http://www.grimmspeed.com/images/product_images/exhaust_manifold_inside_coat_600px_2.jpg

http://www.grimmspeed.com/images/product_images/exhaust_manifold_inside_coat_600px_1.jpg

GrimmSpeed
07-05-2007, 05:27 PM
i'm REALLY diggin our new blue ceramic coating.


http://www.grimmspeed.com/images/product_images/exhaust_manifold_blue_coating_400_border_3.jpg

http://www.grimmspeed.com/images/product_images/exhaust_manifold_blue_coating_400_border_1.jpg

http://www.grimmspeed.com/images/product_images/exhaust_manifold_blue_coating_400_border_2.jpg

http://www.grimmspeed.com/images/product_images/exhaust_manifold_blue_coating_400_border_4.jpg

http://www.grimmspeed.com/images/product_images/exhaust_manifold_blue_coating_400_border_5.jpg


Justin

409industries
07-06-2007, 09:31 AM
Im definitely looking at that exhaust manifold with crossover pipe... Ill be in touch!

BlueRu
07-06-2007, 09:35 AM
Im liking the looks of the blue coating. I may need to save up some cash for a bit.......

Drew84
08-23-2007, 11:31 AM
This is my next mod, cause its SCCA STU legal. I need this and the AP street tuner software.

UP2MTNS
08-23-2007, 12:06 PM
what about coating an IC? I just picked up an APS IC and want the thermal dispersant per your IC experiment ...pricing?

GrimmSpeed
08-23-2007, 04:36 PM
what about coating an IC? I just picked up an APS IC and want the thermal dispersant per your IC experiment ...pricing?


we can definitely put dispersant on an IC.... we only have black for the dispersant. shoot me a pm and we can talk pricing