PDA

View Full Version : Mudflap Dimensions

munozppk
12-27-2007, 07:10 PM
Can someone give me the dimensions for the mudflaps you're using. I have to fab my own so this will give me something to work with. Please include how far they stick out from the body to the side and bottom. Thanks in advance.
strat
12-27-2007, 07:35 PM
i'm using sparco's from rallylights.com. i'll have to take some measurements. as for how far they stick out, they are just basic flaps so you would adjust how little or far they stick out.
wolfman79
12-27-2007, 08:02 PM
Mine are ~15" top to bottom and 18" wide in front/14" wide in rear. they stick out about an inch from the fender. Yes they are huge but they were cheap and they are super effective.
RS-ti_Andy
12-27-2007, 08:56 PM
ok..just goto a farm and fleet, or fleet farm, or something basic where u will find thick mudflaps and buy them... orrr get the big rig flaps and u will have the hardware u need and plenty of rubber to use!
409industries
12-27-2007, 09:04 PM
The rallyarmor ones dont stick out super far or anything. They dont travel very high up the fender either. I have some Fastline mudflaps lying around (that i need to sell) that are a bit bigger...
munozppk
12-27-2007, 09:06 PM
The rallyarmor ones dont stick out super far or anything. They dont travel very high up the fender either. I have some Fastline mudflaps lying around (that i need to sell) that are a bit bigger...


Oh yeah? How much?
rollo
12-27-2007, 09:45 PM
This might be helpful:
http://www.scoobymods.com/forums/showthread.php?t=50

Susquehanna Motorsports/rallylights.com has material for a reasonable price:
Heavy-duty (90A durometer/1/8" thick) urethane flap material (http://www.rallylights.com/Rally/mud_flap.asp)
Rallly blingin' Sparco decal flaps (http://www.rallylights.com/Sparco/MISC_Sparco_Mud_Flap_Kits.asp)
munozppk
12-27-2007, 09:53 PM
This might be helpful:
http://www.scoobymods.com/forums/showthread.php?t=50

Susquehanna Motorsports/rallylights.com has material for a reasonable price:
Heavy-duty (90A durometer/1/8" thick) urethane flap material (http://www.rallylights.com/Rally/mud_flap.asp)
Rallly blingin' Sparco decal flaps (http://www.rallylights.com/Sparco/MISC_Sparco_Mud_Flap_Kits.asp)


That was helpful. I got a 30 day trial of AutoCAD. Im going to use it to design my mudflaps and skid plate.