Subychristian
06-20-2011, 12:40 PM
Hey so i wanted to put some mudflaps on my rig but i didnt want to spend the $110 on rally armor so i decided to make my own. They take a while to make but they are well worth it. I started out by going to my local truck center and picking up a 36" x 36" 18 wheeler mudflap for $15.27. I first had to take off the bright orange "Clarks Truck Center" For this i used a sanding disk on a drill.
My brother came out to help...
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture8.jpg
Once that was done I used a black spray paint to make it a darker black. After that i made a stencil of what i wanted and test fitted them on the car (cardboard)
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture7.jpg
after i got the shape and length i wanted i made paper stencils and traced them onto the truck flap.
My friend mike helping me out
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture6.jpg
The material is about a half inch thick so i had to use a skill saw and a hack saw to cut it.
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture4.jpg
This is the finnished product
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture3.jpg
I made the back ones longer than i needed them so i could cut them to exactly the right length but i decided to keep them long
on my car....sorry for crappy cell phone pictures
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture-1.jpg
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture3-1.jpg
My brother came out to help...
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture8.jpg
Once that was done I used a black spray paint to make it a darker black. After that i made a stencil of what i wanted and test fitted them on the car (cardboard)
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture7.jpg
after i got the shape and length i wanted i made paper stencils and traced them onto the truck flap.
My friend mike helping me out
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture6.jpg
The material is about a half inch thick so i had to use a skill saw and a hack saw to cut it.
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture4.jpg
This is the finnished product
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture3.jpg
I made the back ones longer than i needed them so i could cut them to exactly the right length but i decided to keep them long
on my car....sorry for crappy cell phone pictures
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture-1.jpg
http://i1235.photobucket.com/albums/ff421/subychristian/mms_picture3-1.jpg