PDA

View Full Version : Official GrimmSpeed Exhaust Parts Thread


GrimmSpeed
12-12-2007, 11:06 PM
Due to high demand for the last 2 months you have only been able to get your hands on one by being on a waiting list. Starting today we have the new up pipes fully in stock and ready to ship!

http://www.grimmspeed.com/images/product_images/up_pipe_flames_600_1.jpg



You are looking at the same outstanding quality as our other exhaust pieces. Folks, this is by far the nicest up pipe we've have seen to date(and we've seen almost every other up pipe on the market).


massiave SS flanges
35% thicker stainless piping than most competitors(14 gauge v. 16 gauge)
+10whp gain
minimal internal steps for maximum flow
complete stainless steel construction
optional ceramic coating
weight reduction over stock piece
flex joint that is NOT located in the bend which adds life expectancy to the flex section. many other up pipes have a flex right in a sharp bend so all the exhaust/turbulence is hitting up against it.
reduce turbo lag
increase exhaust flow to turbo


$179.99
http://www.grimmspeed.com/catalog/product_info.php?cPath=22&products_id=77

Adding a non-cat'd up pipe is one of the first things you should do to your Subaru. Arguably one of the best $/HP ratios. Due to emission reasons Subaru has to but very restrictive cats in the exhaust system. With the GrimmSpeed up pipe these cats are eliminated. Another great feature of the GrimmSpeed up pipe is that the inlet is gasket matched so you have a perfectly smoothed out exhaust flow compared to the big step that that tiny stock inlet has.

The GrimmSpeed up pipe is specifically created without an EGT bung. The ecu does not use the egt sensor for air/fuel adjustments. You do not need the egt sensor. If you would like to keep tabs on EGT temperatures the correct place to do it is on the exhaust manifold right after the exhaust ports, this is the only place where the correct temperatures can be taken.

Applications:
02-08 WRX
04-08 STi
04-08 LGT
04-08 FXT
04-08 Baja T

As an option we can treat the pipes with our Ceramic Thermal Coating for $20. Shipping to the lower 48 states will be $10. We also carry the OEMUp pipe gaskets... up pipe>turbo is 14.99 and the manifold>turbo is 15.99. We recommend getting the gaskets to ensure you have a leak free system.

http://www.grimmspeed.com/images/product_images/up_pipe_500_2.jpg

http://www.grimmspeed.com/images/product_images/uppipe_500_1.jpg

we port down the pipe to flange connection so there is absolutely the smoothest exhaust flow as possible. something the competitors definitely DONT do.
http://www.grimmspeed.com/images/product_images/up_pipe_500_5.jpg

http://www.grimmspeed.com/images/product_images/uppipe_vs_competitors_500_2.jpg
http://www.grimmspeed.com/images/product_images/up_pipe_500_3.jpg

http://www.grimmspeed.com/images/product_images/up_pipe_500_4.jpg

You wont find a better quality up pipe on the subaru market!
Link to product:
http://www.grimmspeed.com/catalog/product_info.php?cPath=22&products_id=79

Justin
www.grimmspeed.com (http://www.grimmspeed.com)
AIM: GrimmSpd
Phone: 612.481.5871
Email: sales@grimmspeed.com

RS-ti_Andy
12-12-2007, 11:11 PM
not bad.. look how thick those flanges are! and all stainless!

GrimmSpeed
12-18-2007, 11:51 AM
not bad.. look how thick those flanges are! and all stainless!


you know it! right now i believe we are on only pipe on the market that every part is made from stainless(pipe, flex, flange).

Azewaldo
12-18-2007, 12:46 PM
Damn, that thing is sexy! Nice price, too. When I'm in the market...

UP2MTNS
12-18-2007, 01:49 PM
I have mine already, just haven't had a chance to install yet :(

GrimmSpeed
01-18-2008, 10:55 PM
we just sold out of the up pipes 2 days ago guys. hoping to have them in stock in 1 week. we will still be taking orders on them right now and all of those orders will be placed on a "pre buy" list which will cement your place for getting your hands on one in the next batch.


Justin
www.grimmspeed.com (http://www.grimmspeed.com)
AIM: GrimmSpd
612.481.5731

GrimmSpeed
06-26-2008, 04:31 PM
Up Pipes and Crosspipes back in stock today and ready to ship!!


Up Pipe:
http://www.grimmspeed.com/catalog/product_info.php?cPath=22&products_id=79 (http://www.grimmspeed.com/catalog/product_info.php?cPath=22&products_id=79)

Crosspipe:
http://www.grimmspeed.com/catalog/product_info.php?cPath=22&products_id=52 (http://www.grimmspeed.com/catalog/product_info.php?cPath=22&products_id=52)

Justin

GrimmSpeed
07-08-2008, 03:49 PM
i found this cool informative video on external wastegates today:

http://www.youtube.com/watch?v=PA5T5PnWE-k

Justin

jakeachy
07-08-2008, 04:13 PM
great share^

GrimmSpeed
08-26-2008, 04:15 PM
Up Pipes and HiFlow Crosspipes are back in stock again!


Justin

409industries
08-26-2008, 04:24 PM
I <3 my GS uppipe!

GrimmSpeed
09-11-2008, 12:36 PM
GrimmSpeed Up Pipe Quick Facts

We spent alot of time in R&D on the perfect dimensions of this pipe. It has a very thick pipe wall thickness of 2.0mm. The up pipe inlet is 1.9" and the outlet is 1.72". The inlet size is the perfect size as it allows you to get a perfect mating to the gasket but with a little bit of wiggle room for the gasket to move around and still not be in the way. The pipe tapers down to 1.72" so it acts like a funnel going into the turbo..this allows for the smoothest transition into the most common turbos. Many of our competitors either have a much to big or much to small up pipe inlet, this destroys the airflow quality, leading to slower turbo spoolup.

Since we are a porting company we make sure to have the smoothest transitions between pipes to allow for maximum flow and quickest spoolup(we call this "quality" airflow).

GrimmSpeed
09-12-2008, 12:22 PM
All GrimmSpeed Up Pipes and HiFlow Crosspipes that have went out the last 2 weeks and all future Up Pipes/Crosspipes will now have 35% thicker stainless steel piping! This means that we now offer one of the thickest piped Up Pipes and the thickest Crosspipe availabe in the entire Subaru market.

Everday, us Subaru dorks over here at GrimmSpeed strive to give you premium Subaru parts...and we enjoy doing it! :)

GrimmSpeed
09-16-2008, 11:13 AM
EWG Up Pipes were finished today so they are back in stock and ready to ship!

Link to EWG Up Pipe
http://www.grimmspeed.com/catalog/product_info.php?cPath=22&products_id=121

GrimmSpeed
09-17-2008, 03:52 PM
We now have logos on all of our exhaust pipes so you can make sure you are getting an original GrimmSpeed product.
http://www.grimmspeed.com/images/product_images/uppipe_blue_600_1.jpg


Like always, we port down the lips so our customers have optimal flow through the pipe with no lips.
http://www.grimmspeed.com/images/product_images/uppipe_pipe-flange_600_1.jpg

GrimmSpeed
10-22-2008, 09:25 AM
Here is a picture of where the Tial wastegate ends up after it is install with our EWG Up Pipe Kit. Look at all the room! :)

Our EWG Up Pipe kit fits with more downpipes than any other kit on the market. It even fits the huge TurboXS 4" DP!!

http://www.grimmspeed.com/images/product_images/ewg_uppipe_600_4.jpg


More EWG info:
http://www.grimmspeed.com/catalog/product_info.php?cPath=22&products_id=121

Justin