exhaust gas temp gauge?

[snicker]

Where do I install the bung for the sensor thing for the EGT? (where on the manifold)

[PSG STI]

Scooby Mods is your friend!

http://www.scoobymods.com/forums/showthread.php?t=3367&highlight=EGT+probe

- Matt

[409industries]

Whatever you do don't tap it in the uppipe. The EGT bung should be on the driver side exhaust manifold.

Sensor screwed in, it should hang about 1/2 way into the pipe.
http://www.dirtyimpreza.com/hosting/sti/2007-12-2-gimmspeed_install/grimmspeed_install_005.jpg

Thats the sensor wire hanging down. Bolt everything up, then tighten down the connections between the manifold and the crosspipe. Dont forget to thread the wire to the sensor through a cut hole in the stock heat shield.
http://www.dirtyimpreza.com/hosting/sti/2007-12-2-gimmspeed_install/grimmspeed_install_007.jpg

[snicker]

thanks and the pics are great

[409industries]

thanks and the pics are great

No problem! You happened to ask shortly after we did this mod :)