sti intake manifold

[25rscubie]

will a sti intake manifold fit on ej251 heads, im brain storming parts for a N/A build

[williaty]

If you got the TGV risers, it would bolt up. However, it would be a horrible manifold for an NA build.

You want the 2005-2007 2.5RS manifold.

[carl]

yea why do you want this for an N/A build?

[bue car]

If you got the TGV risers, it would bolt up. However, it would be a horrible manifold for an NA build.

You want the 2005-2007 2.5RS manifold.

these better then the 00 rs im? Due to the large box design?

[MConte05]

Long runners, no TGV's, pretty good design.

[bue car]

na's don't have tgv's. My runners look the same.

[25rscubie]

i want longer runners for when i do finally build it, i knew the sti's were longer. i didnt know the newer rs had longer runners that will probably do better then and i m guessing it has the same bolt pattern as my 251?

[bue car]

go jdm og status and find a jdm sti im. they have the longest runners.

[brandon mitchel]

will a sti intake manifold (http://www.carpartswholesale.com/cpw/intake_manifold.html) fit on ej251 heads, im brain storming parts for a N/A build

Not really sure dude. What would want to accomplish by doing that? I suggest not to try that up.

[bue car]

they will fit, all ej's should fit. if you want a NA build, you then want a 05 rs IM, its the best na IM out there.

[25rscubie]

from the pictures i have seen the bolt patterns look the same, but has anyone tryed swaping for the 05 rs intake. so it will be between the 05rs intake or the jdm intake

[williaty]

There are a number of people who have swapped the 05-07 intake manifold onto the older cars. There's some custom fabbing required due to the new mani being DBW. You'll have to create brackets for your cable throttle.

[25rscubie]

i wasnt sure what year they went to DBW. im guessing the throttle bodies are different in bolt patterns

[williaty]

Bolt pattern is the same, brackets around the throttle body and whatnot are very different.